3com WL-560 Bedienungsanleitung PDF herunterladen (Seite 17)

Deciding Where to Place the Bridge 11

Deciding Where to

Place the Bridge

Place the Bridge in a dry, clean location near the hub, computer, or

printer that will be connected to the Bridge. The location must have a

power source and be within the following distance of a Wi-Fi compliant

wireless LAN access point or ad-hoc wireless station:

■ For 802.11a compatibility, place the Bridge within 50 m (164 ft) of a

Wi-Fi compliant wireless LAN access point.

■ For 802.11b/g compatibility, place the Bridge within 100 m (328 ft) of

a Wi-Fi compliant wireless LAN access point.

The location should be away from transformers, heavy-duty motors,

fluorescent lights, microwave ovens, refrigerators, or other equipment

that could cause radio signal interference.

Wall-Mounting the

Bridge

The Bridge comes with a cradle for mounting on a wall. For additional

security, the Bridge also comes with a locking bar, which can be used

with a security lock (not provided) to lock the Bridge to the cradle after

the Bridge is mounted to a wall.

To wall-mount the bridge:

1 Screw the cradle to a wall,

as shown in Figure 4.

Figure 4 Wall-Mounting the Bridge

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 69 70

Keine Kommentare

3com WL-560 Bedienungsanleitung Seite 17